Read more about Micro Drives? Enter your e-mail address here and you will receive the PDF.
Master controller FCT640 modular
For industrial motion control, CMZ provides FCT640 programmable plc controller: a new generation, modular, compact and high performing system based on CODESYS 3.5 with integrated I/Os. Its technological soul is fully conceived and developed by CMZ.
FCT640 integrates motion control solutions into a single and compact technological device. The controller is equipped with most of the field buses used in industry (EtherCAT, CANopen, ModbusTCP) and integrated modular I/O units, both digital and analog.
The choice of the OPC UA communication protocol is coming soon for implementation, to allow the system to be networked to the outside efficiently and safely by ensuring full connectivity with other devices as a relevant feature for Industry 4.0. interoperability.
The power of the processor, the presence of Ethernet and CAN ports and serial ports, alongside with a total memory capacity of over 1 GB plus an SD-Card, complete FCT640 technological equipment.
Main features FCT640 Master controllers :
Processor
CPU: RISC dual core 64bit, 1.0 GHz three level cache
Memory capability
1 GB Nand Flash for storage 512 MB DRAM high bandwidth 64 bit 1666 MT/s 32 KB Ferromagnetic RAM (non-volatile PLC data) SD-Card
Communication ports
1xRJ45 Ethernet 10/100 MBit TCP/IP (Debug)
2xRJ45 Ethernet 10/100 MBit (Fieldbus)
1xRJ45 CAN-Bus (CANopen Master)
Local I/O modules
64 modules, each with a maximum of 16-bit IO (1024 digital) or 8 channel analog (512 analog) – Big variety of modules available
Fieldbus
EtherCAT Master
CANopen Master
Network connectivity
OPC-UA (available soon)
Modbus TCP Master/Slave
Communications based on UDP-TCP
WEB server
PLCHandler
Future option
Integrated LTE modem
General
Power supply 24V DC
9 LEDs RTC with CR2032 Battery Reset-Button – Restore-Button
0° – 50°C ambient temp
Fanless
Dimensions (mm) (without modules )
H 110 x W 57 x D 73
Weight (Kg) (without modules )
0,3
